• Power: 30 watts @ 4 ohms
• Speaker: 1x 8" Ampeg
• Controls: Volume, Preamp with 3 band EQ
• SGT overdrive switch (Super Grit Technology)
• Inputs: 6.3 mm jack input 0 dB and 6.3 mm jack input -15dB, aux in
• Headphone out
• Dimensions: 433 x 411 x 306 mm
• Weight: 10.5 kg

• 4 impact-dynamic playing surfaces
• 25 integrated sounds
• 10 preset kits
• Add samples via SD card slot
• Up to 512 sounds and 91 drum kits
• Blue illuminated pads for good visibility in the dark
• 6.3 mm stereo jack outputs (L / R) for connection to speakers or mixing consoles
• 6.3mm stereo jack headphone output
• 6.3mm stereo jack input for additional pad
• USB port to upload samples directly from Mac or PC
• USB-MIDI interface for direct connection of Mac or PC

• LED Moving Head with 7 x 10W RGBW 4-in-1 LED's
• Output: 6.100 Lux @ 1m
• Lens: 25¡
• DMX-512 protocol w/ 7 or 12-channel control modes: dimmer, strobe (0-10Hz), pan (540¡ max), tilt (270¡ max), pan fine, tilt fine, red, green, blue, white, colour macros, sound active
• User selectable modes: DMX, auto, master/slave, sound (via integral microphone w/ adjustable sensitivity)
• Control panel: 4-digit LED display + 4 push-buttons, for easy programming
• DMX input & output: 3-pin XLR connectors
• Metal housing w/ hanging bracket (truss- or other clamp not included)
• Low noise Delta Electronics cooling fan
• Power consumption: 80W (max)
• For indoor use only
• Dim.(LxWxH): 27*26*23cm /10.63*10.24*9.05 in
• Net weight: 2.75kg/ 6 lbs

STAGG Flat PAR 3 Performer set with 4 PAR 12 x 1-watt M4 RGBW

Performer set with 4 PAR 12 x 1-watt M4 RGBW DJ / Lighting | | | LED Lighting Sets

Ref : SLB 4P121-M41-1

• Type: Light set with 4 flat PAR spotlights
• LED: 4 x 12 RGBW LED, 1 watt per LED
• Beam angle: 25°
• Control modes: DMX-512 (3, 6 or 15 channels), master/slave, auto, sound
• Functions: Dimmer, strobe, auto, RGBW colour changing, remote control
• Display: 4-digit
• Housing: ABS
• Fixing: Ready for standard 35-mm diameter pole
• Inputs and outputs: 2 x 3-pin DMX (male and female), IEC
• Cooling: Low-noise fan
• Use: Indoor
• Power consumption: 60 watts
• Dimensions: 90 x 16 x 8 cm (35.4 x 6.3 x 3.2″)
• Set weight: 5.5 kg (11 lb)
• Included: Remote control and tripod stand

High Quality Professional Microphones
Set of Drum Microphones
Includes Hard Aluminium Carry Case
Protective Foam Filled Case

Includes:
1 x Bass Drum Microphone
4 x Tom/Snare Drum Microphones
2 x Condenser Pencil Type Microphones
2 x Pipettes
4 x Drum Clamp Modification
2 x Mic Clamps for Condenser Microphones

• Two of the best performing mic preamps the Scarlett range has ever seen, now with switchable Air mode to give your recordings a brighter and more open sound

• Two high-headroom instrument inputs to plug in your guitar or bass

• Two balanced line inputs, suitable for connecting line-level sources

• High-performance converters enable you to record and mix at up to 24-bit/192kHz

• With our Easy Start tool, it's now easier than ever to get up and running

The DJLIGHT65 is a light stand that holds and also powers four disco lighting effects. The stand features two RGBW Par Cans as well as two red and green lasers.

The Par Cans have been equipped with 12 x 1W LEDs and produces vibrant red, green, blue and white colours. The two 130mW red and green lasers create strong, colourful patterns that light up the room with ease. The DJLIGHT65 can be used in a range of modes including automatic mode, master/slave mode as well as via DMX (with 8-channels) and remote control so you can take control of the DJ Light 65 wirelessly.

The black lighting stand also features grippy, anti-slip feet for excellent stability while the crossbar that holds the lighting effects also powers them, so you do not need to worry about messy cables.

• 40 mm custom drivers with CCAW voice coils deliver a broad frequency range and accurate response
• Closed-back, circumaural design for excellent isolation
• Smooth synthetic leather and large low-resistance cushions ensure stress-free wearability and high levels of isolation
• Three-dimensional arm pivot construction and adjustable slider length alleviate fatigue when working for extended periods
• Moveable earcups allow single-ear monitoring
• Thick ABS housing and rigid die-cast aluminum support-arms for use in the toughest working environments
• Straight 3 m cable suitable for use in a wide variety of applications *6.3 mm diameter standard stereo plug adaptor included
• Convenient carrying bag included