Complete Vocal Production Package

• Power: 30 watts @ 4 ohms
• Speaker: 1x 8" Ampeg
• Controls: Volume, Preamp with 3 band EQ
• SGT overdrive switch (Super Grit Technology)
• Inputs: 6.3 mm jack input 0 dB and 6.3 mm jack input -15dB, aux in
• Headphone out
• Dimensions: 433 x 411 x 306 mm
• Weight: 10.5 kg

• 4 impact-dynamic playing surfaces
• 25 integrated sounds
• 10 preset kits
• Add samples via SD card slot
• Up to 512 sounds and 91 drum kits
• Blue illuminated pads for good visibility in the dark
• 6.3 mm stereo jack outputs (L / R) for connection to speakers or mixing consoles
• 6.3mm stereo jack headphone output
• 6.3mm stereo jack input for additional pad
• USB port to upload samples directly from Mac or PC
• USB-MIDI interface for direct connection of Mac or PC

• LED Moving Head with 7 x 10W RGBW 4-in-1 LED's
• Output: 6.100 Lux @ 1m
• Lens: 25¡
• DMX-512 protocol w/ 7 or 12-channel control modes: dimmer, strobe (0-10Hz), pan (540¡ max), tilt (270¡ max), pan fine, tilt fine, red, green, blue, white, colour macros, sound active
• User selectable modes: DMX, auto, master/slave, sound (via integral microphone w/ adjustable sensitivity)
• Control panel: 4-digit LED display + 4 push-buttons, for easy programming
• DMX input & output: 3-pin XLR connectors
• Metal housing w/ hanging bracket (truss- or other clamp not included)
• Low noise Delta Electronics cooling fan
• Power consumption: 80W (max)
• For indoor use only
• Dim.(LxWxH): 27*26*23cm /10.63*10.24*9.05 in
• Net weight: 2.75kg/ 6 lbs

Spectacular multicolour laser that creates stunning 3D lightshows 500mW version of the best selling Kam Laserscan Hyper 3D 8 breathtaking effects in one unit! Ideal for DJs, nightclubs and events ILDA connection for professional control High power class 3B colour laser Red diode: 100mW / 638nm DPSS green diode: 80mW / 532nm Blue diode: 300mW / 450nm Creates extraordinary lightshows using the following effects: Flat beam & in-air tunnel FX Wide angle Star FX Kaleidoscope FX Spirostar FX Multi-grating FX Northern Lights FX Wide beam FX Hyper 3D projection FX/ second-hand

STAGG Flat PAR 3 Performer set with 4 PAR 12 x 1-watt M4 RGBW

Performer set with 4 PAR 12 x 1-watt M4 RGBW DJ / Lighting | | | LED Lighting Sets

Ref : SLB 4P121-M41-1

• Type: Light set with 4 flat PAR spotlights
• LED: 4 x 12 RGBW LED, 1 watt per LED
• Beam angle: 25°
• Control modes: DMX-512 (3, 6 or 15 channels), master/slave, auto, sound
• Functions: Dimmer, strobe, auto, RGBW colour changing, remote control
• Display: 4-digit
• Housing: ABS
• Fixing: Ready for standard 35-mm diameter pole
• Inputs and outputs: 2 x 3-pin DMX (male and female), IEC
• Cooling: Low-noise fan
• Use: Indoor
• Power consumption: 60 watts
• Dimensions: 90 x 16 x 8 cm (35.4 x 6.3 x 3.2″)
• Set weight: 5.5 kg (11 lb)
• Included: Remote control and tripod stand

The HPWASH200 is a powerful 200W white LED stage-blinder for fully controllable light wash to stage or audience. Linear dimming control via DMX or internal programs can provide a smooth or immediate transition from blackout to full brightness. Housed in an all-metal casing with fan cooling for durability and reliable operation.

4x 50W High output COB LEDs
Full linear dimming
8-Channel DMX control
Power supply 110-240Vac, 50/60Hz (IEC)
Power consumption 200W
Fuse rating F3AL 250Vac
Light source 4x 50W White LED
DMX channels 8
Beam angle 40°
Housing Full Metal, powder painted
Dimensions 270 x 270 x 140mm
Weight 3.1kg

Set of 2 chain-drive kick drum pedals. The pedals can be used independently on 2 kick drums or on a single kick drum, since one of the pedals has dual beater holders, which can be driven via the link bar from the other pedal.

- Can be used for twin or single kick drum setups

- Supplied with 2xKPB1 pedal beaters and a drum key

- Fully adjustable

- Dimensions (each pedal) - 325x320x140mm

- Weight - 4.82kg