• Chorus and vibrato of the legendary CE-1 and CE-2 in stereo quality
• Control knobs for Rate and Depth
• 3 Modes: Standard, CE-1 Chorus, CE-1 Vibrato
• Analogue components with bucket brigade device (BBD)
• Operation with 9 V battery or 9 V power supply unit (both not included - suitable power supply available under: article nr 409939)
• Dimensions (W x H x D): 73 x 59 x 129 mm
• Weight (including battery): 450 g

• Power: 200 watts at 4 ohms and 130 watts at 8 ohms
• Input Level with signal level display
• Ultra-high input impedance precursor especially for passive basses
• 3-Band EQ filters for classical trace-sound
• Post EQ XLR DI output
• Ground Lift switch
• Headphone output: 6.35 mm
• Dimensions (H x W x D): 3.4 x 17.1 x 10.4 cm
• Weight: 0.73 kg

• Delay
• Waza Craft Series
• Controls for: Repeat Rate, Intensity and Echo
• Analog circuit
• Standard and Custom Mode
• Delay time in Standard Mode: 20 - 300 ms
• Delay time in Custom Mode: max. 800 ms
• Input for expression pedal
• Direct output (jack)

• Waza series
• Analogue Chorus
• 4 Switches for mode selection
• Standard Mode delivers the original DC-2 sound
• SDD-320 mode with authentic SD-320 sound
• 20 Variations possible
• 2x Inputs
• 2x Outputs
• Dimensions: 129 x 73 x 39 mm
• Weight: 450 g
• Made in Japan

The Afterneath sounds a lot like it looks!

Once inside, a reflection of light from an unknown source catches your eye, and you notice a bizarre sheen on the walls of the cave. You timidly inch closer to the walls of the cave. Placing your hand gently on the cavern wall, you feel the rock move. The cave is alive! Alarmed, you emit a loud gasp, which reverberates throughout the subterranean landscape. Upon further listening, it appears as though the reverberations of your voice are in fact a swarm of short digital delays which may be used to create wild and cavernous reverbs, or scattered, short, rhythmic delays with bizarre characteristics.

• Digital reverb
• Emulates a vintage Amp-Style spring reverb
• 30-150 ms Pre-Delay
• Controls for Depth, Dwell, Attack
• Analog Dry Path
• True bypass
• Bypass foot switch
• Noise free relay-based soft touch switching
• Status LED
• Metal housing
• Input and output 6.3 mm mono-jack
• Power supply via 9 V DC power supply (2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included), battery operation is not supported
• Power consumption: 80 mA
• Dimensions (L x W x H): 117 x 64 x 57 mm
• Hand made in USA

• Oktave reverb
• 8 Selectable reverb modes: Abyss, Shimmer, Sub, Sub Shimmer, Astral, Ascend, Descend, Cosmos
• 8 Freely editable presets
• Freely assignable expression- or CV control for all control options
• Variable modulation
• Innovative Stretch function doubles the length of the reverb effect and adds an adjustable pitch bending effect
• Buffered bypass with switchable Tails Mode
• Analog dry signal path
• Artwork by well-known Marvel Comics artist Matt Horak
• Controls for: Length, Depth, Rate, Tone, Mix
• 8-Way rotary switch for selecting presets
• 8-Way rotary switch for selecting reverb modes
• Bypass footswitch
• Stretch footswitch
• Status LEDs
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• 6.3 mm Expression pedal input

• Delay / Reverb
• Up to 1.5 seconds delay time
• Reverb and delay can be used together or separately
• Flexi-Switch footswitch works as latching and momentary switch
• True Bypass
• Controls for Time, Repeats, Reverb, Mix
• Bypass foot-switch
• Noiseless relay-based soft-touch circuitry
• Status LED
• Metal casing
• 6.3 mm Mono jack input / output