• Polar pattern: Cardioid
• 18 mm capsule
• Max. SPL: 136 dB
• Frequency response: 20 - 20,000 Hz
• Impedance: 200 Ohm ± 30% (@ 1kHz)
• Recommended load impedance:> 1000 ohms
• THD: 1% @ 1 kHz
• Signal-to-noise ratio: 77 dB
• Power supply: 9-48 V DC phantom power
• Power consumption: 3 mA typical
• Dimensions: 165 x 48 mm
• Weight: 0.3kg
• Incl. shock mount, windshield, tripod stand and male XLR to female XLR cable

• Equipped with: 5" Woofer LF driver, 1" silk tweeter HF driver
• Power: 2x 40 W (sine)/ 120 W (peak)
• Audio inputs: RCA and 6.3 mm jack
• Headphone output: 3.5 mm Jack
• Magnetically shielded
• Dimensions: 56 - 20,000 Hz
• Power supply: 110 - 240 V, 50/ 60 Hz
• Internal power adapter
• Dimensions: 184 x 221 x 269 mm
• Weight: 5.7 kg
• Including: Audio cable RCA to 3.5mm stereo jack, connection cables from speaker to speaker, power cord, quick start guide, safety and warranty information

• UHF Single Multi-Channel Receiver operates between 863.00MHz - 864.90MHz frequencies / 10 Channels
• LCD display with channel, frequency, RF & AF information
• Microphone volume control
• Channel/Frequency adjust and set buttons
• IR window
• 2 x Antenna
• Balanced audio output and mix output socket
• Mains driven - PSU included

Microphone:
• 1 x Wireless Microphone
• LCD display showing frequency, channel,
battery indicator, mute
• On/Off/Mute switch
• 2 x 1.5V AA Batteries per microphone (batteries included)
• Working distance up to 50m

• 4 Velocity sensitive pads with 25 integrated drum and percussion sounds
• User samples available via standard SD card (SD card not included)
• Backlit display
• Trigger / switch input on the back
• Sound sets storable
• Reverb effect
• MIDI output to control additional synthesisers or software

• Uses: Voice, instruments and podcasts
• Capsule: 34-mm-diameter gold-sputtered double-sided diaphragm condenser
• Polar pattern: Cardioid / Omnidirectional
• Sensitivity: - 36 dB +/- 2 dB (0 dB = 1 V / Pa at 1 kHz)
• Frequency response: 30 Hz to 18 kHz
• Maximum sound pressure level: 138 dB (at 1 kHz < or = 1 % THD)
• Signal to noise ratio: 86 dB
• Sampling rate: Up to 96 kHz
• Sampling resolution: 16 / 24 bits
• Compatibility: Windows and Mac OS X, without additional driver
• Self noise: 16 dBA
• Dynamic range: 112 dB
• Connector: Type B USB
• Headphone output: 3.5 mm (1/8") mini jack
• Dimensions: 56 x 170 mm (2.2 x 6.7")
• Weight: 350 g (0.78 lb)

• Bluetooth® Wireless Technology
• Adjustable Sensory Bass
• Microphone, Call, Track, and Volume Control
• 40 Hours of Battery Life
• Rapid Charge: 10 Minutes = 3 Hours    

Skullcandy Crusher wireless headphone with up to 40 hours of battery life. With Stereo Immersion Tech which gives a double sensory base experience. The base can be adjusted. The headphones are collapsible. With a built-in microphone so you can talk on your smartphone and control for volume and track selection. Comes with a protective travel case. Can also be connected via the supplied cable if the battery runs out.

High resolution, sound-isolating earphones

Frequency range - 10Hz-40kHz

Sensitivity - 108 dB/mW

Impedance - 30 ohms

Plug - 3.5mm (1/8") mini jack

Cable length - 1.2 metres

Weight - 20g 

Included - EVA foam case, 3 pairs of memory foam buds, 2 pairs of rubber buds

Colour - Black