• Polar pattern: Cardioid
• 18 mm capsule
• Max. SPL: 136 dB
• Frequency response: 20 - 20,000 Hz
• Impedance: 200 Ohm ± 30% (@ 1kHz)
• Recommended load impedance:> 1000 ohms
• THD: 1% @ 1 kHz
• Signal-to-noise ratio: 77 dB
• Power supply: 9-48 V DC phantom power
• Power consumption: 3 mA typical
• Dimensions: 165 x 48 mm
• Weight: 0.3kg
• Incl. shock mount, windshield, tripod stand and male XLR to female XLR cable

• Equipped with: 5" Woofer LF driver, 1" silk tweeter HF driver
• Power: 2x 40 W (sine)/ 120 W (peak)
• Audio inputs: RCA and 6.3 mm jack
• Headphone output: 3.5 mm Jack
• Magnetically shielded
• Dimensions: 56 - 20,000 Hz
• Power supply: 110 - 240 V, 50/ 60 Hz
• Internal power adapter
• Dimensions: 184 x 221 x 269 mm
• Weight: 5.7 kg
• Including: Audio cable RCA to 3.5mm stereo jack, connection cables from speaker to speaker, power cord, quick start guide, safety and warranty information

• UHF Single Multi-Channel Receiver operates between 863.00MHz - 864.90MHz frequencies / 10 Channels
• LCD display with channel, frequency, RF & AF information
• Microphone volume control
• Channel/Frequency adjust and set buttons
• IR window
• 2 x Antenna
• Balanced audio output and mix output socket
• Mains driven - PSU included

Microphone:
• 1 x Wireless Microphone
• LCD display showing frequency, channel,
battery indicator, mute
• On/Off/Mute switch
• 2 x 1.5V AA Batteries per microphone (batteries included)
• Working distance up to 50m

• 4 Velocity sensitive pads with 25 integrated drum and percussion sounds
• User samples available via standard SD card (SD card not included)
• Backlit display
• Trigger / switch input on the back
• Sound sets storable
• Reverb effect
• MIDI output to control additional synthesisers or software

• Uses: Voice, instruments and podcasts
• Capsule: 34-mm-diameter gold-sputtered double-sided diaphragm condenser
• Polar pattern: Cardioid / Omnidirectional
• Sensitivity: - 36 dB +/- 2 dB (0 dB = 1 V / Pa at 1 kHz)
• Frequency response: 30 Hz to 18 kHz
• Maximum sound pressure level: 138 dB (at 1 kHz < or = 1 % THD)
• Signal to noise ratio: 86 dB
• Sampling rate: Up to 96 kHz
• Sampling resolution: 16 / 24 bits
• Compatibility: Windows and Mac OS X, without additional driver
• Self noise: 16 dBA
• Dynamic range: 112 dB
• Connector: Type B USB
• Headphone output: 3.5 mm (1/8") mini jack
• Dimensions: 56 x 170 mm (2.2 x 6.7")
• Weight: 350 g (0.78 lb)

• Bluetooth® Wireless Technology
• Adjustable Sensory Bass
• Microphone, Call, Track, and Volume Control
• 40 Hours of Battery Life
• Rapid Charge: 10 Minutes = 3 Hours    

Skullcandy Crusher wireless headphone with up to 40 hours of battery life. With Stereo Immersion Tech which gives a double sensory base experience. The base can be adjusted. The headphones are collapsible. With a built-in microphone so you can talk on your smartphone and control for volume and track selection. Comes with a protective travel case. Can also be connected via the supplied cable if the battery runs out.

High resolution, sound-isolating earphones

Frequency range - 10Hz-40kHz

Sensitivity - 108 dB/mW

Impedance - 30 ohms

Plug - 3.5mm (1/8") mini jack

Cable length - 1.2 metres

Weight - 20g 

Included - EVA foam case, 3 pairs of memory foam buds, 2 pairs of rubber buds

Colour - Black

The Woody SC (SA-3SC) is a passive, magnetic soundhole pickup that delivers a bright, clear acoustic tone that is great for both energetic strumming, and delicate fingerstyle playing. The fact that it is a single coil means that you get more chime, and top end brilliance.

All of the Woodys are available in our custom maple, walnut or black stained housing, and are double potted to keep them resistant to feedback. It mounts instantly into your soundhole, with no modification of any kind needed to the guitar and can easily be removed at a moments notice. It comes with a 14-foot low capacitance, studio quality cable that will plug directly into your favorite amp, PA, direct box, or console. Fits all standard soundholes . Great for all standard types of steel string acoustic guitars.

The QTX LED Par Bar Lighting System comes equipped with four LED par can lighting effects that are each equipped with 12 RGBW LEDs and feature a range of operational modes for exciting light shows.

• Red, green, blue and white colour mixing
• Quick and simple fold away design
• Various auto modes
• Remote included
• Beam angle: 30°
• DMX channels: 8

• 2 Way Stereo, 3 Way Mono Crossover
• 19" Rack Mountable
• Butterworth Filters 18dB/Octave
• Continuously Adjustable Cut-Off Frequencies
• 40Hz Ultra Low Frequency Cut
• Phase Invert Function
• Inputs & Outputs via XLR

This powerful 400W UV cannon will fill a variety of venues with an outstanding UV glow. The unit has been specially designed to house a 400W blacklight lamp (not included) and also features a protective front grill and hanging bracket. This high output fixture will transform any event, club, bowling alley or stage by creating a wide spread of atmospheric UV light.

• Lamp: LAMP64 (Included)
• 400W Super High output Black light
• Ideal for large venues
• Comes with Hanging Bracket.
• Protective front grill
• Power consumption: 400W
  Power supply: 240V, 50Hz
  Dimensions: 307 x 355 x 455mm
  Weight: 8.05kg