Filter By
Categories
Availability
Brand
Weight
Yamaha HPH-MT7
- 40 mm custom drivers with CCAW voice coils deliver a broad frequency range and accurate response
- Closed-back, circumaural design for excellent isolation
- Smooth synthetic leather and large low-resistance cushions ensure stress-free wearability and high levels of isolation
- Three-dimensional arm pivot construction and adjustable slider length alleviate fatigue when working for extended periods
- Moveable earcups allow single-ear monitoring
- Thick ABS housing and rigid die-cast aluminum support-arms for use in the toughest working environments
- Straight 3 m cable suitable for use in a wide variety of applications *6.3 mm diameter standard stereo plug adaptor included
- Convenient carrying bag included
Pro-Ject Essential 2
Entry level audiophile turntable – a taste of vinyl magic.
Essential ii comes with an upgraded and easier to set up tone arm.
Citronic CX34 2/3/4-way...
The Citronic CX34 is a 2-way or 3-way stereo or 4-way mono active crossover designed to split frequencies so that low frequencies are delivered to the amp driving the sub cabinets and mid/top frequencies are delivered to the amp driving the mid/top frequency cabs.
This type of system is more efficient and delivers more accurate sound quality, especially in larger PA systems.
Whilst primarily designed to deliver a more detailed sound, the Citronic CX34 also protects your equipment from overloading and avoids potentially blowing your mid/top speaker cabinets by sending the low frequencies just to the subs.
The Citronic active crossover offers a user-friendly operation easily accessible when installed in a 19" rack cabinet.
AFX Light BARCOB2
The AFX BARCOB2 is a LED bar that is equipped with two 18W RGB LEDs. The LEDs used are special COB LEDs that help reduce glare when lighting up a bright subject.
The unit comes with a range of operational modes including automatic mode, sound activated mode and master-slave mode as well as DMX mode with four or ten channels available for use. On the rear of the Bar Cob 2 is a LED display that allows you to navigate the various settings on the light. The device can be suspended from a lighting fixture or used as a floor light and thanks to the adjustable support you can angle the light into whatever position necessary.A radiator cools the BARCOB2 so don’t have to deal with a noisy fan and comes with an IR remote for wireless control of the lighting effect.
Stagg LED Stage Light ECOPAR 6
- Flat Ecopar Spotlight With 6 RGBWAUV LED Lights
- 40° Beam Angle Provides Excellent Light Coverage
- Array Of Function Controls Including Dimmer & Strobe Settings
- 4-Digit Display Ensures Simple Operation
- Ideal For Indoor & Small Venues
Stagg UV24 Stage Light
Stagg UV24 / SLEUV243 High Brightness Black Light U.V. Ultra Violet Stage Light. Like a high power UV bulb, but ultra-cool running and loads brighter!
If you want a high brightness UV Blacklight, the the Stagg UV 24 is the ultra Violet stage light for you.
It has 24 U.V. LED lamps; each ultraviolet led is 3 watts, so there's a total of 72 watts of UV.
The Stagg black light has enough power to comfortably illuminate with UV over 64 sq metres to a high of at least 3m.
DMX 512 in and out on 3 pin XLR, 240 V mains in via IEC. Supplied with UK mains plug and hanging bracket.
Trinity Beam Equinox
DMX channels: 2
Laser diodes:
1 x 80mW Green (532nM)
1 x 400mW Blue (450nM)
1 x 300mW Red (650nM)
Sound Active, auto, DMX and master/slave modes
3-pin XLR in/out sockets
IEC power in socket
Power consumption: 220W
Power supply: 240V - 50Hz
Dimensions: 350 x 392 x 110mm
Weight: 4.6Kgs
Preowned Technics VC-4...
Power output: 50 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.003%
Damping factor: 60 Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 76dB (MM), 91dB (line)
Channel separation: 50dB (line)
Output: 150mV (line)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 430 x 126 x 311mm
Weight: 6.9kg
VS1500 Smoke Machine
The VS 1500 features a removable built-in LCD timer remote control with a 2.5m cable length and fits neatly into the rear of the unit to allow control from a distance. Extra 5-Pin DMX cables can be added to achieve further control distances. A further two remote controls are supplied with this unit.