AbletonLive Controller

• Midi mixer to control virtually any DAW
• 8 individual line faders, 1 master fader
• 24 knobs, arranged 3 per channel
• 16 buttons arranged in 2 banks provide mute, solo and record arm functionality per channel
• Sends all mixer settings to the DAW with a single button press
• 1 to 1 mapping with Ableton Live (Ableton Live Lite included)

Wireless microphone system with fixed UHF transmitter and half rack-width receiver. Available with either a handheld microphone with a high quality vocal capsule or a bodypack transmitter supplied with a choice of neckband and lavalier microphones. The receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.

The Citronic CX34 is a 2-way or 3-way stereo or 4-way mono active crossover designed to split frequencies so that low frequencies are delivered to the amp driving the sub cabinets and mid/top frequencies are delivered to the amp driving the mid/top frequency cabs.

This type of system is more efficient and delivers more accurate sound quality, especially in larger PA systems.

Whilst primarily designed to deliver a more detailed sound, the Citronic CX34 also protects your equipment from overloading and avoids potentially blowing your mid/top speaker cabinets by sending the low frequencies just to the subs. 

The Citronic active crossover offers a user-friendly operation easily accessible when installed in a 19" rack cabinet. 

The AFX BARCOB2 is a LED bar that is equipped with two 18W RGB LEDs. The LEDs used are special COB LEDs that help reduce glare when lighting up a bright subject.

The unit comes with a range of operational modes including automatic mode, sound activated mode and master-slave mode as well as DMX mode with four or ten channels available for use. On the rear of the Bar Cob 2 is a LED display that allows you to navigate the various settings on the light. The device can be suspended from a lighting fixture or used as a floor light and thanks to the adjustable support you can angle the light into whatever position necessary.A radiator cools the BARCOB2 so don’t have to deal with a noisy fan and comes with an IR remote for wireless control of the lighting effect.

10x / 14 x DMX channels
8 x 3W long-life RGBW CREE LEDs (>50.000 h)
Stand-alone, DMX & show modes
Built-in sound controlled programs
Strobe effect
Electronic dimmer 0-100%
Power supply 100-240Vac 50/60Hz
Consumption 39W max.
Fuse 2A
Light source 8 x 3W RGBW CREE LED
Tilt 270°
Beam angle 4°

The Electrovision NJS adjustable aluminium lighting stand with T-bar is made has a high grade aluminium construction with a 1.22 metre T-bar.

The stand comes in three sections and extends from 1.5m to 2.4m and with the extra pole that comes supplied it can be extended even further to 3.5m. The stand has a max load of 30kg so it can handle most lighting jobs and with the addition of the extra pole the whole stand weighs only 10kg.