Filter By
Availability
Price
Stagg SRM70 Classic Ribbon...
Uses | Vocal and instrumental |
Polar pattern | Figure-8 |
Ribbon | Pure aluminium |
Sensitivity | - 52 dB +/- 2 dB (0 dB = 1 V / Pa at 1 kHz) |
Frequency response | 20 Hz to 18 kHz |
Output impedance | 350 ohms +/- 20 % (at 1 kHz) |
Maximum sound pressure | 148 dB (at 1 kHz ≤ 1 % THD) |
Signal to noise ratio | 77 dB |
Self noise | 17 dBA |
Dimensions | 25 x 160 mm |
Weight | 420 g |
Included | Shock mount |
Stagg Headbanger 10
- LED Moving Head with 7 x 10W RGBW 4-in-1 LED's
- Output: 6.100 Lux @ 1m
- Lens: 25¡
- DMX-512 protocol w/ 7 or 12-channel control modes: dimmer, strobe (0-10Hz), pan (540¡ max), tilt (270¡ max), pan fine, tilt fine, red, green, blue, white, colour macros, sound active
- User selectable modes: DMX, auto, master/slave, sound (via integral microphone w/ adjustable sensitivity)
- Control panel: 4-digit LED display + 4 push-buttons, for easy programming
- DMX input & output: 3-pin XLR connectors
- Metal housing w/ hanging bracket (truss- or other clamp not included)
- Low noise Delta Electronics cooling fan
- Power consumption: 80W (max)
- For indoor use only
- Dim.(LxWxH): 27*26*23cm /10.63*10.24*9.05 in
- Net weight: 2.75kg/ 6 lbs
Stagg FLATPAR3
STAGG Flat PAR 3 Performer set with 4 PAR 12 x 1-watt M4 RGBW
Performer set with 4 PAR 12 x 1-watt M4 RGBW DJ / Lighting | | | LED Lighting Sets
Ref : SLB 4P121-M41-1
- Type: Light set with 4 flat PAR spotlights
- LED: 4 x 12 RGBW LED, 1 watt per LED
- Beam angle: 25°
- Control modes: DMX-512 (3, 6 or 15 channels), master/slave, auto, sound
- Functions: Dimmer, strobe, auto, RGBW colour changing, remote control
- Display: 4-digit
- Housing: ABS
- Fixing: Ready for standard 35-mm diameter pole
- Inputs and outputs: 2 x 3-pin DMX (male and female), IEC
- Cooling: Low-noise fan
- Use: Indoor
- Power consumption: 60 watts
- Dimensions: 90 x 16 x 8 cm (35.4 x 6.3 x 3.2″)
- Set weight: 5.5 kg (11 lb)
- Included: Remote control and tripod stand
Stagg BC300 Sunburst...
Pickups: 2 x JB
Controls: 2 x Volume + 1 x Tone
Body: solid Alder - Neck: Hard Maple, bolt-on, 867 mm, (34 .2 in.)
Fingerboard: Rosewood, 24 frets
Bridge: "JB" Classic
Machine heads: diecast, black
Stagg 60 GA R Amplifier
- 60 W RMS 2-channel Guitar Amplifier w/ spring reverb
- 1 x 12" speaker
- Metal front grille
- High impedance instrument input
- 2 channels (clean/overdrive) w/ independent volume controls, selectable via panel or footswitch
- 3-band EQ (Bass/Middle/Treble)
- Master volume control
- Gain control (overdrive channel)
- Effects Loop (send/return)
- Line in/output
- Headphone output
- Stereo mini-jack input for CD/MP3 player
- Weight - 17,3 kg / 38.1 lbs
- Size (HxWxD) - 47 x 50 x 26 cm / 18.5 x 19.7 x 10.2 in.
Stagg SEL-HB90 WHB
Standard Series, electric guitar with solid Mahogany body flat top
- Body: Solid mahogany
- Neck: Mahogany, bolt on satin
- Fingerboard: Rosewood with perloid white dots inlays, 22 frets
- Pickguard: 1 ply black
- Pickups: 1 x P90 + 1 x Humbucker
- Controls: 1 x volume + 1 x tone
- Control Knobs : Black caps
- Pickup selector switch: 3-way "toggle switch"
- Bridge: Tune-o-matic with stop tail piece
- Machine heads: Die-cast with chome buttons
- Nut: Bone
- Strings: made in Korea
- Finish: Open pore
Colour: White
Stagg SES50M-FRD Red Fiesta
STAGG SES50M FRD Electric guitar with solid alder body
Neck: Maple screwed with easy access to the latest boxes
Fingerboard: Maple, 21 boxes, satin aged
Pickups: 3 x single coil Settings: volume + 1 x 2 x tones
Pickup Selector: 5 positions
Bridge: classic vibrato Mechanical in oil baths
Nut: NuBone
Strings: D'Addario
Color: red fiesta
Preowned Stagg 20 AAR Amp
- Power: 20 W RMS
- With spring reverb
- Equipped with: 1x 8" Speaker
- Impedance: 4 Ohm
- With coaxial tweeter
- Jack and XLR inputs
- 3-Band EQ and parametric mid-range controls
- Volume and gain controls
- Headphone output
- Stereo jack input for CD/MP3 player
- Dimensions: 33.8 x 35 x 20 cm
- Weight: approx. 11 kg