Filter By
Categories
Availability
Brand
Weight
Active filters
HiWatt Bulldog 77 Bass...
Great british tone - perfect Bass Amp for studio and recording. Hi-Headroom plus deep, rich, detailed clean tones.
XLR Balanced Out, Line Out.
Boss Nextone Stage G12-100...
• Professional performance amplifier with authentic Tube Logic tone
• Four analog Class AB power amp circuits, selectable from the panel
• Streamlined combo design with 40 watts of power and custom 12-inch speaker
• Clean and lead channels, with standard and custom mode options
• Dynamically responsive power control for cranked-up sound and response at reduced volumes
• Nextone Editor for customizing internal amp parameters,
• Boost and Tone switches for adding crunch and sparkle
• Built-in delay, tremolo, and reverb effects, plus loop for patching in external effects
• External speaker jacks: one 8 ohm and two 16 ohm
• Line, USB, and phones/recording outputs, with three Air Feel mic’d cab settings selectable from the Nextone Editor
• Support for direct recording and re-amping via USB
Yamaha Revstar RSE20 Swift...
Body
- Body Material: Chambered Mahogany
- Body Finish: Gloss Polyurethane
Neck & Fretboard
- Neck Material: 3pc Mahogany
- Neck Finish: Satin Polyurethane
- Fretboard Material: Rosewood
- Fretboard Radius: 12”
- Fret Wire: Jumbo
- Number of Frets: 22
- Nut Material: PPS
- Neck Width: 41.9 / 56.8 mm
- Thickness at 1st fret: 21.0 / 23.9 mm
Hardware & Electronics
- Neck Pickup: VH3n (Humbucker / Alnico V)
- Bridge Pickup: VH3b (Humbucker / Alnico V)
- Controls: Master Volume, Master Tone(Push-Pull, "Dry Switch")
- Switching: 3-Position Lever Switch
- Bridge: Tune-O-Matic
- Tail Piece: Stopbar
- Tuning Machines: Die-cast
Hofner Very Thin Dark Stain
Peavey 6505 MH 20 W...
- 20 Watt mini guitar head
- All-valve construction, with 2 x EL84 power valves, anda 3 x 12AX7 preamp valves
- On-board 3-band EQ, Reverb, and FX Loop
- Attenuator Switch for 20, 5, or 1 watt operation
- Lightweight and portable design
- TSI valve-monitoring indicator
Yamaha Revstar Element...
Body
- Body Material: Chambered Mahogany
- Body Finish: Gloss Polyurethane
Neck & Fretboard
- Neck Material: 3pc Mahogany
- Neck Finish: Satin Polyurethane
- Fretboard Material: Rosewood
- Fretboard Radius: 12”
- Fret Wire: Jumbo
- Number of Frets: 22
- Nut Material: PPS
- Neck Width: 41.9 / 56.8 mm
- Thickness at 1st fret: 21.0 / 23.9 mm
Hardware & Electronics
- Neck Pickup: VH3n (Humbucker / Alnico V)
- Bridge Pickup: VH3b (Humbucker / Alnico V)
- Controls: Master Volume, Master Tone(Push-Pull, "Dry Switch")
- Switching: 3-Position Lever Switch
- Bridge: Tune-O-Matic
- Tail Piece: Stopbar
- Tuning Machines: Die-cast
Tokai 'Love Rock' Model Black
BODY: Maple Top / Mahogany Back
NECK: Canadian Maple One Piece Set-Neck
NECK Profile: U shape / 22F / R350, Scale 628mm
FRETS: Sanko SBB-213 (Medium Jumbo Size)
NUT: Cow Bone (Width: 43mm)
FINGERBOARD: Carbonized Jatoba Wood
MACHINE HEADS: SSD800G_P04
BRIDGE: LS-VBC Bridge LS-VTC Tailpiece
PICKUPS: LSC-F x 2
CONTROLS: 2V, 2T, 3way-SW
FINISH: Poly Finish
Peavey Special 212 Chorus...
100 watt TransTube® output section |
Two independent channels: Clean and Lead |
Two 12″ Peavey Blue Marvel® loudspeakers |
Chorus with Depth and Rate controls, defeatable per channel |
Effects loop |
Footswitch jack for global effects defeat, volume boost and channel switching |
Genuine spring reverb and analog chorus |
Clean channel features 3 band EQ plus a Presence control |
Lead channel features 3 band EQ, Pre Gain control with Gain Boost, Mid Scoop and Post Gain |
Weight Packed: 43.98 lb(19.95 kg) |
Width Packed: 19.5″(49.53 cm) |
Height Packed: 26.5″(67.31 cm) |
Depth Packed: 9.5″(24.13 cm) |