• Modelling amp with 11 amp models
• 8 Integrated effects
• Newly developed vocoder effect
• Looper
• Integrated rhythm section with 33 high-quality drum- and percussion grooves
• Separately adjustable microphone input
• AUX input
• Headphone jack with speaker simulation
• Tuner
• DC 5V USB-C input
• Power: 50 W
• Equipped with an 8" speaker
• Connections: Instrument input (6.3 mm jack)
• Dimensions (W x D x H): 390 x 250 x 358 mm
• Weight: 7.3 kg
• Included: Power supply and carrying strap

Body

• Top Material: Mahogany
• Body Material: Flame Maple Back & Sides
• Finish: Matt Black Stain

Neck and Fingerboard

• Neck type: Hofner Traditional Set Neck
• Frets: 22
• Neck Scale: 24.7”/628mm

• 80 Watts into 8 Ohms
• 12" Blue Marvel speaker
• High and Low Gain inputs
• TransTube tube emulation circuitry
• Footswitchable Clean and Lead channels
• 3 band passive EQ on each channel
• 3 position EQ/Gain Voicing switch on each channel
• Reverb with level control
• Footswitchable Boost with level control
• ¼" stereo Speaker Simulated Direct Out jack with level control
• Footswitch optional
• Weight 18 kg

• Body Wood: Alder
• Construction: Bolt-on
• Scale Length: 25.5" (648 mm)
• Neck Wood: Maple
• Fingerboard Wood: Walnut
• Fingerboard Radius: 13.8" (350 mm)
• Frets: 22, Medium
• Bridge: Vintage Tremolo
• Tuners: Die-Cast
• Bridge Pickup: Humbucker
• Middle Pickup: Single-Coil (Ceramic)
• Neck Pickup: Single-Coil (Ceramic)
• Controls: Master Volume, Master Tone, 5-Position Pickup Selector Switch

• Body
• -Top: Basswood
• -Back: Basswood
• Neck:
• -Wood: Maple
• -Fingerboard: Rosewood
• -Scale: 24.7"/62.8cm
• -Nut Width: 42mm
• -Number Of Frets: 22
• Pickups:
• -Bridge: Hofner Open Humbucker

• 20 Watt mini guitar head
• All-valve construction, with 2 x EL84 power valves, anda 3 x 12AX7 preamp valves
• On-board 3-band EQ, Reverb, and FX Loop
• Attenuator Switch for 20, 5, or 1 watt operation
• Lightweight and portable design
• TSI valve-monitoring indicator

Body

• Body Material: Chambered Mahogany
• Body Finish: Gloss Polyurethane

Neck & Fretboard

• Neck Material: 3pc Mahogany
• Neck Finish: Satin Polyurethane
• Fretboard Material: Rosewood
• Fretboard Radius: 12”
• Fret Wire: Jumbo
• Number of Frets: 22
• Nut Material: PPS
• Neck Width: 41.9 / 56.8 mm
• Thickness at 1st fret: 21.0 / 23.9 mm

Hardware & Electronics

• Neck Pickup: VH3n (Humbucker / Alnico V)
• Bridge Pickup: VH3b (Humbucker / Alnico V)
• Controls: Master Volume, Master Tone(Push-Pull, "Dry Switch")
• Switching: 3-Position Lever Switch
• Bridge: Tune-O-Matic
• Tail Piece: Stopbar
• Tuning Machines: Die-cast

• Amp Type: Solid State
• Channels: Clean, Crunch, Lead, Ultra
• Power: 100 Watts
• Power Amp: Current Feedback Technology for Warm, Tube-Like Tone
• Effects: Chorus, Flanger, Tremolo, Delay, Reverb (Separate per Channel with Channel FX Memory)
• Effects Loop: Serial
• Footswitch: 4-Way Stageboard (FS-4) Included
• Special Features: Channel FX Memory, CD-Player Input, Headphones Out
• Line Out: Yes