• Power: 20 W RMS
• With spring reverb
• Equipped with: 1x 8" Speaker
• Impedance: 4 Ohm
• With coaxial tweeter
• Jack and XLR inputs
• 3-Band EQ and parametric mid-range controls
• Volume and gain controls
• Headphone output
• Stereo jack input for CD/MP3 player
• Dimensions: 33.8 x 35 x 20 cm
• Weight: approx. 11 kg

• ConnectorsAux-in, External speaker(s), Headphone
• Number of channels3
• Number of speakers1
• Amp modellingno
• Effects loopno
• Weight0 - 4.9 kg
• Built-in tunerno
• Built-in effectsDSP / misc.
• Colourblack
• Speaker diameter8 inches
• Power attenuatorno
• Amplifier typetransistor
• Amplifier valvenot applicable
• Power in Watts21 - 30 Watts

• Chorus and vibrato of the legendary CE-1 and CE-2 in stereo quality
• Control knobs for Rate and Depth
• 3 Modes: Standard, CE-1 Chorus, CE-1 Vibrato
• Analogue components with bucket brigade device (BBD)
• Operation with 9 V battery or 9 V power supply unit (both not included - suitable power supply available under: article nr 409939)
• Dimensions (W x H x D): 73 x 59 x 129 mm
• Weight (including battery): 450 g

• Waza series
• Analogue Chorus
• 4 Switches for mode selection
• Standard Mode delivers the original DC-2 sound
• SDD-320 mode with authentic SD-320 sound
• 20 Variations possible
• 2x Inputs
• 2x Outputs
• Dimensions: 129 x 73 x 39 mm
• Weight: 450 g
• Made in Japan

• Power: 200 watts at 4 ohms and 130 watts at 8 ohms
• Input Level with signal level display
• Ultra-high input impedance precursor especially for passive basses
• 3-Band EQ filters for classical trace-sound
• Post EQ XLR DI output
• Ground Lift switch
• Headphone output: 6.35 mm
• Dimensions (H x W x D): 3.4 x 17.1 x 10.4 cm
• Weight: 0.73 kg

• Allows for latency-free playing of synthesizer sounds with the guitar
• Polyphonic sound generation
• 121 Sounds
• Can be connected via a conventional 6.3 mm jack cable
• Features leads, pads, organs, basses and more, as well as a variety of sound effects and rhythmic synthesizer patterns
• Controls: Type, Variation, Tone, Depth, Effect, Direct
• Switch: Guitar/Bass
• LED: Effect On
• Footswitch: Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• FX Loop Send & Return: 2 x 6.3 mm jack
• EXP/CTL input: 6.3 mm Stereo jack
• Power adapter connection: AC adapter, 5.5 x 2.1 mm, negative polarity inside
• Power consumption: 85 mA

• Looper
• High quality sound with 32 bit AD / DA and 32 bit floating point processing
• 13 Hours of recording time
• Multicoloured backlit LCD display for displaying the loop status and the processing parameters
• Reverse function
• 7 Different drum kits and 57 preset rhythms with A / B variations
• Advanced control via external foot switches, expression pedal or MIDI
• 99 Phrase memories
• Saving and loading WAV loops via USB
• Controls: Memory / Loop Level
• Push buttons: Memory, Setup, Rhythm On / Off and Rhythm Tempo
• Footswitch: Looping functions pedal with record, overdub, play, stop and undo / redo

The Afterneath sounds a lot like it looks!

Once inside, a reflection of light from an unknown source catches your eye, and you notice a bizarre sheen on the walls of the cave. You timidly inch closer to the walls of the cave. Placing your hand gently on the cavern wall, you feel the rock move. The cave is alive! Alarmed, you emit a loud gasp, which reverberates throughout the subterranean landscape. Upon further listening, it appears as though the reverberations of your voice are in fact a swarm of short digital delays which may be used to create wild and cavernous reverbs, or scattered, short, rhythmic delays with bizarre characteristics.