• 5 impressive light effects in one compact fixture
• Auto, sound-activated, master-slave or DMX control
• Supplied with mounting bracket and IR remote control

The Tetra is a 4-in-1 DMX light effect built into a single compact housing. A moonflower effect produces a wide pattern of colour from six 3W LEDs, countered with an RGBW aqua ripple effect. At the...

• Auto, sound-activated, master-slave or DMX control
• 4 impressive light effects in one compact fixture
• Supplied with mounting bracket

QTX Led Derby S offers the energetic movement of the traditional multicolour Derby together with a powerful strobe lighting effect. The sharp multi-beam colour combinations create dazzling effects which are sure to grab the attention of everyone on the dance floor.

The AFX BARCOB2 is a LED bar that is equipped with two 18W RGB LEDs. The LEDs used are special COB LEDs that help reduce glare when lighting up a bright subject.

The unit comes with a range of operational modes including automatic mode, sound activated mode and master-slave mode as well as DMX mode with four or ten channels available for use. On the rear of the Bar Cob 2 is a LED display that allows you to navigate the various settings on the light. The device can be suspended from a lighting fixture or used as a floor light and thanks to the adjustable support you can angle the light into whatever position necessary.A radiator cools the BARCOB2 so don’t have to deal with a noisy fan and comes with an IR remote for wireless control of the lighting effect.

10x / 14 x DMX channels
8 x 3W long-life RGBW CREE LEDs (>50.000 h)
Stand-alone, DMX & show modes
Built-in sound controlled programs
Strobe effect
Electronic dimmer 0-100%
Power supply 100-240Vac 50/60Hz
Consumption 39W max.
Fuse 2A
Light source 8 x 3W RGBW CREE LED
Tilt 270°
Beam angle 4°

The Electrovision NJS adjustable aluminium lighting stand with T-bar is made has a high grade aluminium construction with a 1.22 metre T-bar.

The stand comes in three sections and extends from 1.5m to 2.4m and with the extra pole that comes supplied it can be extended even further to 3.5m. The stand has a max load of 30kg so it can handle most lighting jobs and with the addition of the extra pole the whole stand weighs only 10kg.

• LED: 3 x 4 watts
• Illuminance: 1866 lux at 2 metres (96,6')
• Beam angle: 30°
• Protocol: DMX-512 (4, 6 or 8 channels)
• Functions: Dimmer (0-100 %), strobe (0-20 Hz), auto, sound control, master/slave, remote control
• Display: 4-digit
• Housing: Metal
• Fixing: 3 x M10 and 1 x M12 threaded holes
• Input and output: 3-pin DMX and IEC in and out
• Cooling: No fan
• Use: Indoor
• Power consumption: 20 watts
• Dimensions: 10.8 x 10.8 x 10.4 cm (4.3 x 4.3 x 4.1")
• Weight: 0.6 kg (1.3 lb)
• Included: Remote control

• High Powered vertical or horizontal smoke machine with DMX
• Versatile multi-angle smoke machine with wireless remote control
• 3 minute warm up time
• Supplied with wireless remote control
• LED illuminated bottle
• Master/Slave mode

• DMX 36 Channel Controller
• Sound to Light Function
• Stores up to 9 Programmes
• Maximum of 50 Scenes Per Program
• LED Display & XLR Outputs

• 4 Fixture, 3-5 channel DMX Light Controller for LED lights
• 6 channel modes per fixture (RGB, RGBdim, RGBW, RGBWdim, dimRGB, dimRGBW)
• 1 colour mixing fader
• 8 built-in programs (speed adjustable)
• Adjustable strobe function
• Sound triggered programs