• 5 impressive light effects in one compact fixture
• Auto, sound-activated, master-slave or DMX control
• Supplied with mounting bracket and IR remote control

• Adjustable flash rate & sensitivity
• LED Strobe
• 2 x 20W

STAGG Flat PAR 3 Performer set with 4 PAR 12 x 1-watt M4 RGBW

Performer set with 4 PAR 12 x 1-watt M4 RGBW DJ / Lighting | | | LED Lighting Sets

Ref : SLB 4P121-M41-1

• Type: Light set with 4 flat PAR spotlights
• LED: 4 x 12 RGBW LED, 1 watt per LED
• Beam angle: 25°
• Control modes: DMX-512 (3, 6 or 15 channels), master/slave, auto, sound
• Functions: Dimmer, strobe, auto, RGBW colour changing, remote control
• Display: 4-digit
• Housing: ABS
• Fixing: Ready for standard 35-mm diameter pole
• Inputs and outputs: 2 x 3-pin DMX (male and female), IEC
• Cooling: Low-noise fan
• Use: Indoor
• Power consumption: 60 watts
• Dimensions: 90 x 16 x 8 cm (35.4 x 6.3 x 3.2″)
• Set weight: 5.5 kg (11 lb)
• Included: Remote control and tripod stand

•  2 x rotating arms project 8 sharp light beams in a wide angle sweep effect

• 0-100% dimming and variable strobe

• 145 degrees tilt

• Horizontal or vertical operation

• DMX, Sound-to-Light and Auto modes

• Built-in programs

• Linkable Master/Slave operation

• LED button control panel

• Linkable DMX in and out

• Quick release mounting clamp

• Linkable IEC mains in and out

The SoundLab Mini Strobe is a top-quality compact sized strobe lighting effect that is equipped with a super-bright white LED and features a flash speed control as well as an integrated mounting bracket. This lighting effect is perfect for house parties, mobile entertainers, schools, stages, live events, and theatres.

The 14w mini strobe comes with a robust plastic chassis and is supplied with a built-in adjustable mounting bracket that allows you to mount the effect to a truss or lighting bracket with ease. A flash speed control allows you to adjust the flash speed from one to ten flashes per second to create a crazy flashing effect that goes well with energetic music. The strobe is available in a variety of colours and makes a perfect addition to any party.

The DJLIGHT65 is a light stand that holds and also powers four disco lighting effects. The stand features two RGBW Par Cans as well as two red and green lasers.

The Par Cans have been equipped with 12 x 1W LEDs and produces vibrant red, green, blue and white colours. The two 130mW red and green lasers create strong, colourful patterns that light up the room with ease. The DJLIGHT65 can be used in a range of modes including automatic mode, master/slave mode as well as via DMX (with 8-channels) and remote control so you can take control of the DJ Light 65 wirelessly.

The black lighting stand also features grippy, anti-slip feet for excellent stability while the crossbar that holds the lighting effects also powers them, so you do not need to worry about messy cables.

10x / 14 x DMX channels
8 x 3W long-life RGBW CREE LEDs (>50.000 h)
Stand-alone, DMX & show modes
Built-in sound controlled programs
Strobe effect
Electronic dimmer 0-100%
Power supply 100-240Vac 50/60Hz
Consumption 39W max.
Fuse 2A
Light source 8 x 3W RGBW CREE LED
Tilt 270°
Beam angle 4°

The Electrovision NJS adjustable aluminium lighting stand with T-bar is made has a high grade aluminium construction with a 1.22 metre T-bar.

The stand comes in three sections and extends from 1.5m to 2.4m and with the extra pole that comes supplied it can be extended even further to 3.5m. The stand has a max load of 30kg so it can handle most lighting jobs and with the addition of the extra pole the whole stand weighs only 10kg.

• 192 long life, efficient 5mmØ LEDs (72 red, 60 blue, 60 green)
• Sound activated and auto modes
• Sensitivity and speed controls
• Easy to install and operate
• Solid metal housing and mounting bracket
• Fixed mains lead

The STAGG adjustable monitor stand is made from an all steel frame and can be adjusted in just 3 easy steps. This stand is durable and is perfect for home studios, studio recording and control rooms.