• 5 impressive light effects in one compact fixture
• Auto, sound-activated, master-slave or DMX control
• Supplied with mounting bracket and IR remote control

A unique dual PAR bar set, perfect for mobile DJs and performers who need their stage lighting to be quick and simple to set-up. Arriving with carry bags and stand bags to easily transport, this se...

• Mobile setup with Tripod stand and carry bags
• High Power LED - 10W RGBW 4in1 x 20 Pieces
• Controlled by foot controller and IR remote

STAGG Flat PAR 3 Performer set with 4 PAR 12 x 1-watt M4 RGBW

Performer set with 4 PAR 12 x 1-watt M4 RGBW DJ / Lighting | | | LED Lighting Sets

Ref : SLB 4P121-M41-1

• Type: Light set with 4 flat PAR spotlights
• LED: 4 x 12 RGBW LED, 1 watt per LED
• Beam angle: 25°
• Control modes: DMX-512 (3, 6 or 15 channels), master/slave, auto, sound
• Functions: Dimmer, strobe, auto, RGBW colour changing, remote control
• Display: 4-digit
• Housing: ABS
• Fixing: Ready for standard 35-mm diameter pole
• Inputs and outputs: 2 x 3-pin DMX (male and female), IEC
• Cooling: Low-noise fan
• Use: Indoor
• Power consumption: 60 watts
• Dimensions: 90 x 16 x 8 cm (35.4 x 6.3 x 3.2″)
• Set weight: 5.5 kg (11 lb)
• Included: Remote control and tripod stand

The QTX LED Par Bar Lighting System comes equipped with four LED par can lighting effects that are each equipped with 12 RGBW LEDs and feature a range of operational modes for exciting light shows.

• Red, green, blue and white colour mixing
• Quick and simple fold away design
• Various auto modes
• Remote included
• Beam angle: 30°
• DMX channels: 8

•  2 x rotating arms project 8 sharp light beams in a wide angle sweep effect

• 0-100% dimming and variable strobe

• 145 degrees tilt

• Horizontal or vertical operation

• DMX, Sound-to-Light and Auto modes

• Built-in programs

• Linkable Master/Slave operation

• LED button control panel

• Linkable DMX in and out

• Quick release mounting clamp

• Linkable IEC mains in and out

The DJLIGHT65 is a light stand that holds and also powers four disco lighting effects. The stand features two RGBW Par Cans as well as two red and green lasers.

The Par Cans have been equipped with 12 x 1W LEDs and produces vibrant red, green, blue and white colours. The two 130mW red and green lasers create strong, colourful patterns that light up the room with ease. The DJLIGHT65 can be used in a range of modes including automatic mode, master/slave mode as well as via DMX (with 8-channels) and remote control so you can take control of the DJ Light 65 wirelessly.

The black lighting stand also features grippy, anti-slip feet for excellent stability while the crossbar that holds the lighting effects also powers them, so you do not need to worry about messy cables.

The AFX BARCOB2 is a LED bar that is equipped with two 18W RGB LEDs. The LEDs used are special COB LEDs that help reduce glare when lighting up a bright subject.

The unit comes with a range of operational modes including automatic mode, sound activated mode and master-slave mode as well as DMX mode with four or ten channels available for use. On the rear of the Bar Cob 2 is a LED display that allows you to navigate the various settings on the light. The device can be suspended from a lighting fixture or used as a floor light and thanks to the adjustable support you can angle the light into whatever position necessary.A radiator cools the BARCOB2 so don’t have to deal with a noisy fan and comes with an IR remote for wireless control of the lighting effect.

10x / 14 x DMX channels
8 x 3W long-life RGBW CREE LEDs (>50.000 h)
Stand-alone, DMX & show modes
Built-in sound controlled programs
Strobe effect
Electronic dimmer 0-100%
Power supply 100-240Vac 50/60Hz
Consumption 39W max.
Fuse 2A
Light source 8 x 3W RGBW CREE LED
Tilt 270°
Beam angle 4°

The Electrovision NJS adjustable aluminium lighting stand with T-bar is made has a high grade aluminium construction with a 1.22 metre T-bar.

The stand comes in three sections and extends from 1.5m to 2.4m and with the extra pole that comes supplied it can be extended even further to 3.5m. The stand has a max load of 30kg so it can handle most lighting jobs and with the addition of the extra pole the whole stand weighs only 10kg.

Our state of the art LEDJ UV Stage Wash 18 light is great where the blacklight ultraviolet look is required. This LED light is equivalent to a 400W UV Cannon however with a much-reduced power rating. The Stage Wash ultraviolet light features 18 powerful ultraviolet LEDs that will therefore make objects “glow in the dark”. Also included in the functions are 0-100% dimming and sound active modes making the Stage Wash UV ideal for nightclubs, mobile discos or themed events.

Included in the functions are 0-100% dimming and sound active modes therefore making the Stage Wash UV ideal for nightclubs, mobile discos or themed events. In addition, the LEDJ UV Stage Wash 18 ultraviolet light has the ability to be run in either standalone mode or controlled from a DMX controller.

• 192 long life, efficient 5mmØ LEDs (72 red, 60 blue, 60 green)
• Sound activated and auto modes
• Sensitivity and speed controls
• Easy to install and operate
• Solid metal housing and mounting bracket
• Fixed mains lead

The STAGG adjustable monitor stand is made from an all steel frame and can be adjusted in just 3 easy steps. This stand is durable and is perfect for home studios, studio recording and control rooms.