A unique dual PAR bar set, perfect for mobile DJs and performers who need their stage lighting to be quick and simple to set-up. Arriving with carry bags and stand bags to easily transport, this se...

• Mobile setup with Tripod stand and carry bags
• High Power LED - 10W RGBW 4in1 x 20 Pieces
• Controlled by foot controller and IR remote

Features

• Compact steel housing for discreet fog distribution
• Leaves no residue
• Creates non-toxic white fog
• Quality coverage
• Wired remote control for on demand fog operation
• Adjustable Mounting Bracket

Specifications

• IEC remote control supplied
• Compact and lightweight design
• Power Supply: 240Vac, 50Hz (IEC)
• Power consumption: 400W
• Tank capacity: 0.25l
• Fog output (approx.): 2000 Cu Ft (57m³) / min (approx.)
• Reheat time 3 - 4 minutes
• Remote control: Momentary switch, IEC connection
• Dimensions: 120 x 150 x 240mm
• Weight: 1.5kg

Spectacular multicolour laser that creates stunning 3D lightshows 500mW version of the best selling Kam Laserscan Hyper 3D 8 breathtaking effects in one unit! Ideal for DJs, nightclubs and events ILDA connection for professional control High power class 3B colour laser Red diode: 100mW / 638nm DPSS green diode: 80mW / 532nm Blue diode: 300mW / 450nm Creates extraordinary lightshows using the following effects: Flat beam & in-air tunnel FX Wide angle Star FX Kaleidoscope FX Spirostar FX Multi-grating FX Northern Lights FX Wide beam FX Hyper 3D projection FX

The QTX LED Par Bar Lighting System comes equipped with four LED par can lighting effects that are each equipped with 12 RGBW LEDs and feature a range of operational modes for exciting light shows.

• Red, green, blue and white colour mixing
• Quick and simple fold away design
• Various auto modes
• Remote included
• Beam angle: 30°
• DMX channels: 8

The AFX BARCOB2 is a LED bar that is equipped with two 18W RGB LEDs. The LEDs used are special COB LEDs that help reduce glare when lighting up a bright subject.

The unit comes with a range of operational modes including automatic mode, sound activated mode and master-slave mode as well as DMX mode with four or ten channels available for use. On the rear of the Bar Cob 2 is a LED display that allows you to navigate the various settings on the light. The device can be suspended from a lighting fixture or used as a floor light and thanks to the adjustable support you can angle the light into whatever position necessary.A radiator cools the BARCOB2 so don’t have to deal with a noisy fan and comes with an IR remote for wireless control of the lighting effect.

DMX channels: 2
Laser diodes:
1 x 80mW Green (532nM)
1 x 400mW Blue (450nM)
1 x 300mW Red (650nM)
Sound Active, auto, DMX and master/slave modes
3-pin XLR in/out sockets
IEC power in socket
Power consumption: 220W
Power supply: 240V - 50Hz
Dimensions: 350 x 392 x 110mm
Weight: 4.6Kgs

The VS 1500 features a removable built-in LCD timer remote control with a 2.5m cable length and fits neatly into the rear of the unit to allow control from a distance. Extra 5-Pin DMX cables can be added to achieve further control distances. A further two remote controls are supplied with this unit.

Our state of the art LEDJ UV Stage Wash 18 light is great where the blacklight ultraviolet look is required. This LED light is equivalent to a 400W UV Cannon however with a much-reduced power rating. The Stage Wash ultraviolet light features 18 powerful ultraviolet LEDs that will therefore make objects “glow in the dark”. Also included in the functions are 0-100% dimming and sound active modes making the Stage Wash UV ideal for nightclubs, mobile discos or themed events.

Included in the functions are 0-100% dimming and sound active modes therefore making the Stage Wash UV ideal for nightclubs, mobile discos or themed events. In addition, the LEDJ UV Stage Wash 18 ultraviolet light has the ability to be run in either standalone mode or controlled from a DMX controller.

• High Powered vertical or horizontal smoke machine with DMX
• Versatile multi-angle smoke machine with wireless remote control
• 3 minute warm up time
• Supplied with wireless remote control
• LED illuminated bottle
• Master/Slave mode

• 8x 10W RGBW LEDs 4-in-1
• Motor-driven LED bar rotating at an angle of 230ø 
• Operating modes: Music controlled, Auto, DMX & Master-Slave 
• Individual or grouped LED control 
• 11, 15, 23 or 39 DMX channels 
• Colour changer 
• Strobe 
• 30x automatic programs 
• DMX in/out 
• Power supply in/out