• 5 impressive light effects in one compact fixture
• Auto, sound-activated, master-slave or DMX control
• Supplied with mounting bracket and IR remote control

A unique dual PAR bar set, perfect for mobile DJs and performers who need their stage lighting to be quick and simple to set-up. Arriving with carry bags and stand bags to easily transport, this se...

• Mobile setup with Tripod stand and carry bags
• High Power LED - 10W RGBW 4in1 x 20 Pieces
• Controlled by foot controller and IR remote

A lightweight and compact LED PAR Can fitted with 18 3-in-1 RGB LEDs. This unit can be controlled by auto, sound-to-light, master/slave programs or via DMX and provides a great value solution for b...

• Powered by 18 3-in-1 RGB LEDs
• Automatic colour jump, colour scroll and colour strobe
• Master/slave function with 4 slave modes allows a sequential chase of 4 groups of lights from 1 master

The QTX LED Par Bar Lighting System comes equipped with four LED par can lighting effects that are each equipped with 12 RGBW LEDs and feature a range of operational modes for exciting light shows.

• Red, green, blue and white colour mixing
• Quick and simple fold away design
• Various auto modes
• Remote included
• Beam angle: 30°
• DMX channels: 8

Great for performers, DJs and installations alike this silent operation fixture (no fans) features the latest quad-colour technology. All four colour LED chips are behind a single lens which eliminates shadowing and unevenness. On board modes include DMX, auto, fade and sound operation all controllable from the rear panel. Barn doors are included for precise beam positioning.

•  2 x rotating arms project 8 sharp light beams in a wide angle sweep effect

• 0-100% dimming and variable strobe

• 145 degrees tilt

• Horizontal or vertical operation

• DMX, Sound-to-Light and Auto modes

• Built-in programs

• Linkable Master/Slave operation

• LED button control panel

• Linkable DMX in and out

• Quick release mounting clamp

• Linkable IEC mains in and out

The AFX BARCOB2 is a LED bar that is equipped with two 18W RGB LEDs. The LEDs used are special COB LEDs that help reduce glare when lighting up a bright subject.

The unit comes with a range of operational modes including automatic mode, sound activated mode and master-slave mode as well as DMX mode with four or ten channels available for use. On the rear of the Bar Cob 2 is a LED display that allows you to navigate the various settings on the light. The device can be suspended from a lighting fixture or used as a floor light and thanks to the adjustable support you can angle the light into whatever position necessary.A radiator cools the BARCOB2 so don’t have to deal with a noisy fan and comes with an IR remote for wireless control of the lighting effect.

• Flat Ecopar Spotlight With 6 RGBWAUV LED Lights
• 40° Beam Angle Provides Excellent Light Coverage
• Array Of Function Controls Including Dimmer & Strobe Settings
• 4-Digit Display Ensures Simple Operation
• Ideal For Indoor & Small Venues

10x / 14 x DMX channels
8 x 3W long-life RGBW CREE LEDs (>50.000 h)
Stand-alone, DMX & show modes
Built-in sound controlled programs
Strobe effect
Electronic dimmer 0-100%
Power supply 100-240Vac 50/60Hz
Consumption 39W max.
Fuse 2A
Light source 8 x 3W RGBW CREE LED
Tilt 270°
Beam angle 4°

Our state of the art LEDJ UV Stage Wash 18 light is great where the blacklight ultraviolet look is required. This LED light is equivalent to a 400W UV Cannon however with a much-reduced power rating. The Stage Wash ultraviolet light features 18 powerful ultraviolet LEDs that will therefore make objects “glow in the dark”. Also included in the functions are 0-100% dimming and sound active modes making the Stage Wash UV ideal for nightclubs, mobile discos or themed events.

Included in the functions are 0-100% dimming and sound active modes therefore making the Stage Wash UV ideal for nightclubs, mobile discos or themed events. In addition, the LEDJ UV Stage Wash 18 ultraviolet light has the ability to be run in either standalone mode or controlled from a DMX controller.

• LED: 3 x 4 watts
• Illuminance: 1866 lux at 2 metres (96,6')
• Beam angle: 30°
• Protocol: DMX-512 (4, 6 or 8 channels)
• Functions: Dimmer (0-100 %), strobe (0-20 Hz), auto, sound control, master/slave, remote control
• Display: 4-digit
• Housing: Metal
• Fixing: 3 x M10 and 1 x M12 threaded holes
• Input and output: 3-pin DMX and IEC in and out
• Cooling: No fan
• Use: Indoor
• Power consumption: 20 watts
• Dimensions: 10.8 x 10.8 x 10.4 cm (4.3 x 4.3 x 4.1")
• Weight: 0.6 kg (1.3 lb)
• Included: Remote control

• 192 long life, efficient 5mmØ LEDs (72 red, 60 blue, 60 green)
• Sound activated and auto modes
• Sensitivity and speed controls
• Easy to install and operate
• Solid metal housing and mounting bracket
• Fixed mains lead